Any damage around the teeth surfaces of the sprocket diminishes the life from the conveyor chain.
With traditional sprockets, significantly worn sprocket teeth were repaired by teeth padding or the total sprocket was replaced. In both case, restore was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers for the dramatic financial savings in cost and time.
The teeth may be replaced by two approaches: individual tooth substitute or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on on the sprocket are spot-welded to stop loosening.
The respective structures are illustrated over the correct.
The above photograph along with the major correct illustration show a sprocket for personal tooth substitute. Since the joint encounter concerning the replaced teeth and the sprocket is formed in the special arc, the bonding accuracy is higher as well as the sprocket strength is enhanced. In addition, since the load acting around the mounting bolts is decreased, there is certainly significantly less chance of loosening. This sprocket construction is patented.
You can find two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for big sprockets obtaining heavy loads and welded sheet steel hubs for other applications.