Highest put on resistance accessible by sealing grease involving pins and bushings
The durability of chain is radically enhanced given that grease is sealed in between the pins and bushings by O-rings. The O-ring chain would be the most dependable model from the Greatest Daily life Chain Series with its outstanding put on resistance even within the disorders or environments in which chain servicing is difficult.
Advised uses.
?Situations where frequent chain substitute is required as a result of wear stretch
?Situations in which lubrication during the services is extremely hard
?In an environment with a great deal soil, sand, dust, etc.
?Applications that require power increased than that of the sintered bushing roller chain
Other features
?Decreasing noise. (The noise level is three dB lower compared to conventional roller chains.)
?Decreasing vibration with the friction made by O-Ring. (The energy reduction as a result of friction is nearly negligible, because the frictional force among the pins and bushings is for typically inside the applications.)
Selection of chains
The strength of an O-ring chain is almost precisely the same as that of the typical roller chain. (Because the pins are longer than those of normal roller chain, the average rupture power is somewhat reduced.)
For picking out an appropriate chain, refer to “Selection of Chains” .
Once the support ambient temperature is higher than 80° C, particular heat resistant O-rings need to be utilised. In this case, speak to us for much more info.
Connecting backlinks and offset hyperlinks
Two forms of connecting hyperlinks are available: clearance match and interference fit. When large power or sturdiness is needed, use interference-fit connecting link. Only 2POJ is obtainable as the offset link for all sizes.
Sprockets
O-ring chain employs longer pins than a regular roller chain. When employing multiplex O-ring chain, the typical sprocket for multiplex chains cannot be used.
Caution
O-ring chain isn’t advisable in applications in which solvents or other substances may attack “Nitric Rubber”. Exclusive material O-rings are also obtainable for these circumstances: Please talk to us for facts. In general, “Nitric Rubber” is broken by contact with all the following chemical resources.