General Description
Equiped with a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves in addition to a tank, this power unit can drive a double acting cylinder to extend and retract with no directional solenoid valve. It’s normally used in recre-ational vehicles, pleasure boats and moveable phases, etc.
Specific Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned prior to installation of the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and absolutely free of impurities. N46 hydraulic oil is recommended.
four. The electrical power unit proven is built to be mounted horizontally.
five. Oil changing is needed soon after the original a hundred operation hrs, afterwards when every single 3000 hours.
6. Check the oil degree from the tank soon after the initial operating in the power unit.