1.A connecting website link of an O-ring Chain for standard application is pre-coated with grease in the pins. In advance of connection, confirm the grease on the surfaces of pins, and in the event the quantity of grease is smaller, apply grease with bare hands. (If gloves are used, the grease is going to be absorbed from the gloves.)
Instance: Once the connecting website link (I) of an O-ring chain for general application is
shipped, O-rings are fitted on the roots in the pins. In case the O-rings come loose due to vibration all through transport, refit the O-rings in for the roots on the pins.
In this case, be sure you return the grease collected on the roots with the pins on the central surfaces from the pins, a lot more at portion A than at portions B shown inside the above illustration. (Portions A is worn as a consequence of sliding with the bushings.)
2.The chain is often most easily connected around the teeth of a sprocket. Engage the hyperlinks at both ends with the chain with the sprocket teeth and match connecting pins. In case the sprocket may be moved, the chain can also be linked around the loosened side.
3. Connecting process
one.Confirm that O-rings are attached to your roots of your pins.
2.In case the volume of grease applied to the connecting pins is tiny, coat the pins with grease with the central portions.
3.Insert the connecting pins to the bushings from the inner hyperlinks at both ends.
four.Confirm the grease is applied on the total encounter of your O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and when pressing the connecting plate, set up the spring clip. Confirm whether or not the head (the finish with no split) in the spring clip is turned while in the feeding course of the chain. (See the next illustration.)
six.Make sure you confirm that the spring clip is securely fitted while in the clip grooves from the connecting pins.
This completes jointing in the connecting hyperlink. Note that grease to the surfaces of connecting pins and O-rings could be removed for the duration of installation perform. In this case, re-grease working with the grease within the surface of your base chain or even the grease while in the polyethylene bag by which the connecting website link was contained.