Common Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is made to operate materials managing gear. The reducing motion is achived from the solenoid valve with all the reducing velocity controlled by an adjustable needle valve. The left and appropriate functions are equipped using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please seek advice from our revenue engineer to the distinct pump displacement, motor energy or tank capability.
Specific Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned prior to installation of the electrical power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities.N46 hydraulic oil is recommended.
four. This energy unit needs to be mounted horizontal.
5. Check the oil level inside the tank following the very first commence with the power unit.
6. Oil modifying is 
required right after the preliminary a hundred operation hours, afterwards the moment just about every 3000 hrs.
